VESA Compatible Monitor Mount Guide: How to Check If Your Monitor Fits (2026)
Learn what VESA compatible means, how to find your monitor’s hole pattern and weight limit, and check any mount with our free VESA checker.
By Emily Carter · Updated November 5, 2026 · 10 min read
Most monitor mount boxes say ‘VESA compatible’, and most monitors say it too. But a match on the label does not always mean a match on your desk. The hole spacing, the weight limit and the screws all have to line up. This guide shows you how to check each one in a few minutes. We have not tested mounts ourselves. Everything below comes from maker pages and buying guides, and we list them at the end.
Key Takeaways
- VESA is a standard for the four screw holes on the back of a monitor. A VESA compatible monitor mount is built to attach to those holes.
- Most computer monitors use a 75 x 75 mm or 100 x 100 mm pattern with M4 screws.
- Ergotron says the hole pattern and the monitor’s weight are the main things to check. Screen size matters mainly when space is tight.
- An adapter can fix a pattern mismatch, but it does not raise the mount’s weight limit.
- Use our checker below to compare your monitor with any mount in under a minute.
Quick Answer: What Is a VESA Compatible Monitor Mount?
A VESA compatible monitor mount is a bracket, arm or wall mount that attaches to the standard four-hole pattern on the back of a monitor. To know if it fits yours, check three things: the distance between the holes in millimetres (most monitors use 75 x 75 or 100 x 100), your monitor’s weight without its stand, and the screw size (usually M4). If all three match the mount’s specs, it fits.

What Does VESA Compatible Mean?
VESA stands for the Video Electronics Standards Association. In 1997 it introduced the Flat Display Mounting Interface, which defines a pattern of four threaded holes on the back of monitors and TVs so that mounting hardware from different brands can work together (Source 3). The standards are grouped into classes called MIS-B to MIS-F. Each class sets the hole pattern, the screw type and a maximum display weight (Source 1). For the full table, see Ergotron’s VESA guide.
The holes sit in the middle of the back panel in most cases. A centred pattern puts less twisting force on the mount, so it can hold a heavier load (Source 1).
VESA Size Chart: Hole Patterns, Screws and Weight
The pattern is measured in millimetres from the centre of one hole to the next. The first number is the horizontal spacing and the second is the vertical spacing (Source 4).
| Hole pattern (mm) | VESA class | Screw | Max weight in the standard | Often found on |
|---|---|---|---|---|
| 75 x 75 | MIS-D | M4 | 30.8 lbs (14 kg) | Small monitors |
| 100 x 100 | MIS-D | M4 | 30.8 lbs (14 kg) | Most 24 to 32 inch monitors |
| 200 x 100 | MIS-E | M4 | 50 lbs (23.7 kg) | Larger monitors, small TVs |
| 200 x 200 and up | MIS-F | M6 or M8 | 250 lbs (113.6 kg) | Large monitors and TVs |
Patterns and screws are from Ergotron’s VESA table (Source 1). Other guides list slightly different weights for some classes, and the rating printed on your mount is the number that counts. Evetech notes that 75 x 75 is common on small monitors and 100 x 100 on mainstream 24 to 32 inch monitors (Source 3).
How to Find Your Monitor’s VESA Pattern
- Check the spec sheet or manual first. Search your model number plus ‘VESA’. Most makers list the pattern, for example ‘100 x 100 mm’.
- Look at the back of the monitor. You should see four screw holes in a square or rectangle. They are sometimes hidden behind a stand plate or a snap-on cover.
- Measure centre to centre. Use a ruler in millimetres. Measure left to right, then top to bottom (Source 4).
- Find the weight without the stand. It is in the spec sheet. Some guides suggest leaving 20 to 30 percent of headroom under the mount’s limit (Source 3).
- Read the mount’s listing. Note the patterns it supports, its weight range and the screws in the box.
Free VESA Compatibility Checker
Enter your monitor and the mount you are looking at. The example values are placeholders, so replace them with yours. Nothing you type is saved or sent anywhere.
This checker gives a quick estimate. Always confirm the pattern, weight range and screws in the mount’s own manual before you install.
Weight Matters More Than Screen Size
Ergotron says that when you choose a VESA mount, the hole pattern and the monitor’s weight are the main compatibility checks, and screen size only matters when nearby space limits the install (Source 1). So a 27 inch and a 32 inch monitor can need the same mount, while two ultrawide monitors of the same width can differ a lot in weight. Check the weight in the spec sheet, not the inches.
Screws: Size and Length
Most monitors with 75 x 75 or 100 x 100 holes use M4 screws. Ergotron’s table lists M4 x 10 mm for those classes, while larger patterns use M6 or M8 (Source 1). Length matters as much as thickness. Too short, and the threads may not hold under the monitor’s weight. Too long, and the screw can push into the back panel and damage the display (Source 3). Use the screws and spacers that come with your mount, and follow its manual.
What If My Monitor Has No VESA Holes or the Pattern Does Not Match?
Use an adapter plate
An adapter plate can fix a mismatch, for example a 75 x 75 mount on a 100 x 100 monitor. It does not raise the mount’s weight limit (Source 4). Compare your monitor’s weight with the mount’s rating, not the adapter’s.
Look for an adapter kit or a VESA version
Some monitors have no VESA holes. Ergotron says custom interface adapters may exist, so ask the monitor maker or the mount maker (Source 1). Some all-in-ones and displays come in separate VESA and stand versions. BenQ notes that for the Apple iMac and Studio Display, only the VESA-compatible version can be mounted (Source 2).
Curved and ultrawide monitors: these work with VESA mounts if they have the holes on the back. Lenovo advises checking that the mount can handle the curve and the weight (Source 5). If you are still choosing a screen, check its VESA pattern in the spec sheet first, and see our best monitors for remote work guide.
Common Mistakes to Avoid
- Matching by screen size. Check the hole pattern and the weight instead.
- Measuring the monitor with the stand attached. Use the weight without the stand.
- Swapping the numbers. Measure horizontal first, then vertical.
- Ignoring the screws. Wrong length can fail to hold or damage the display.
- Assuming an adapter adds strength. It does not change the mount’s weight limit.
- Sitting right at the weight limit. Leave some headroom.
Choosing the Right Mount After the Fit Check
Once you know your pattern and weight, the next choice is the type of arm. Gas spring arms move smoothly and mechanical arms usually cost less. Our gas spring vs mechanical spring monitor arm guide explains the difference. For screen height and desk layout, see our monitor setup guide. Clamp mounts also need a sturdy desk edge, so our best desk for home office guide is worth a look too.

Frequently Asked Questions
What does VESA compatible mean?
It means the monitor or mount follows the VESA standard for the four screw holes on the back of a display. A VESA compatible mount can attach to any monitor with a matching hole pattern, as long as the weight and screws also match.
What is the most common VESA pattern for monitors?
100 x 100 mm is common on mainstream monitors, and 75 x 75 mm is common on smaller ones. Both use M4 screws. Larger or heavier monitors and TVs may use 200 x 100, 200 x 200 or bigger patterns.
How do I find my monitor’s VESA size?
Check the spec sheet or manual first. Or measure the distance between the centres of the screw holes on the back in millimetres, horizontal first and then vertical. Also note the monitor’s weight without the stand.
Can I mount a monitor that has no VESA holes?
Sometimes. Some makers and mount brands sell adapter kits for monitors without VESA holes, and some displays come in a separate VESA version. Check with the monitor maker before you buy anything.
What screws do I need for a VESA mount?
Most 75 x 75 and 100 x 100 monitors use M4 screws, and larger patterns often use M6 or M8. Use the screws supplied with your mount and match the length to your monitor so they neither pull out nor push into the display.
Will a 75 x 75 mount fit a 100 x 100 monitor?
Not by itself. Many mounts include a plate that supports both patterns. If yours does not, an adapter plate can bridge the gap, but it does not increase the mount’s weight capacity.

About the author: Emily Carter
Emily Carter writes practical guides on home office setup and remote work for Remote Work Setup. She builds each guide from maker specs, buying guides and owner reports, and says clearly when something has not been tested.
How we wrote this guide
- We compared Ergotron’s VESA table with buying guides from BenQ, Lenovo and Evetech.
- We have not tested mounts hands-on.
- Ergotron and Eureka Ergonomic sell mounts, so read their advice with that in mind.
- Standards numbers vary slightly between sources. Always use the rating printed on your mount and in your monitor’s manual.
- Last updated November 5, 2026.
Sources
- Ergotron: VESA Standard
- BenQ: What Is VESA Mount?
- Evetech: What Is VESA Mount Monitor Standard?
- Eureka Ergonomic: What Is VESA Mount Compatibility?
- Lenovo: What Is a VESA Mount Monitor?
Related Guides
Measure first, then buy
Two numbers and one weight are all you need to avoid a mismatched mount.
Open the VESA checker